I believe that everyone is familiar with wall switch sockets, and there is no shortage on the walls of every family. Home wall switch sockets are commonly used in our daily life. Due to the daily use and daily care, we are not likely to cause damage to individual wall switch sockets. Damaged wall switch sockets need to be removed for inspection or replacement or replacement. Life is more common. If you are replacing a large number of wall switch sockets, you can ask the plumber to help us. If it is, and if it is, we can replace it if it is convenient. Today, GELAN Xiaobian will tell everyone how to remove the wall switch socket.

Wall switch socket removal 5 steps:

1. Open the wall switch and circuit breaker you want to remove. The circuit breaker can control the entire room, or just on a specific wall.

2. Use a flat-blade screwdriver to fix the terminal block to the wall switch cover and remove the screws. Remove the caps from the cover and circuit tester and place the screw terminals on each switch to ensure that there is no power to switch.

3, switch, junction box with a Phillips screwdriver to unscrew two screws · wire drawing switch, from the junction box, so that you can access the wire terminal screw on the side of the switch.

4. On the upper side switch, use a Phillips screwdriver to loosen the terminal screws and pull the wires away from the switch. Pull the switch off the wall.

5. Plastic wire caps are on each line end. Electrical tape wrapped around each cap and line to further secure the end cap. The east-west line enters the junction box. A solid cover is placed in the junction box with fixing screws. Open the circuit breaker of the room's outlet.

The above is the removal steps of the wall switch socket. The disassembly is relatively simple. I believe everyone can do it by themselves. How to install the removed switch socket, or replace it with a new wall switch socket? Please continue to pay attention to GELAN electrical official website.